How to Install Metal Roofing on a Tiny Home: Ana White Tiny House Build [Episode 6]

SUBSCRIBE: How to install metal roofing on a tiny house.
NJ roofers


  1. Reply
    Lisa Hancock Guthrie March 13, 2018

    Do you have a video showing installation of standing seam?

  2. Reply
    KayteGrace March 13, 2018

    thanks so much for these videos. they've been a HUGE help in our tiny house build. i have 2 questions: our tiny house has a shed roof — what kind of flashing do you use to finish the end of the higher wall of a shed roof? also, how do you finish the edge of a roof that's not square? one of the short sides of our tiny house comes to a point, so we have 5 walls instead of 4, and we won't have a continuous line of rib to affix gable flashing to. hope that makes sense! haha.

  3. Reply
    Swan Auto47 March 13, 2018

    Thank you for the videos, they are really helpful

  4. Reply
    Saroya Arts March 13, 2018

    How can you build a 400 sq ft tiny house on a trailer?

  5. Reply
    readu100 March 13, 2018

    Here's my money. Please just build me one.

  6. Reply
    Sara Potter March 13, 2018

    We're building our tiny house in Utah and we're going to be installing onduvilla roofing very soon. It's corrugated just like this metal roofing you're using, but it's made out of asphalt with a fiber mat core. They sell the gasket to go under the edge of the corrugated shingles, but they have the option for a ventilated gasket. It has what looks like pencil holes in it. In what instances would you want to ventilate underneath your shingles like that? I need to figure out which gasket to order.

  7. Reply
    Shawn Watchorn March 13, 2018

    No housewrap? Particular reason, or just a cost saver in a mobile build?

  8. Reply
    Nathan Taylor March 13, 2018

    Just found your episode vids which are helping immensely

  9. Reply
    Phil Mackey March 13, 2018

    thank you so much for sharing … two lovely people xx

  10. Reply
    Narwhal March 13, 2018

    Wondering about overall weight of your tiny? Did you go 16' on center ?  Sorry if you talked about this but i didn't find it if you did.

  11. Reply
    Kimberly Bainum March 13, 2018

    How exactly did you waterproof under the dormer overhang where the flying rafter meets the ridge (shown at 9:14)? Thanks!

  12. Reply
    paultorres March 13, 2018

    Thats so cool!! i need to find a trailer to build one on. great for camping.

  13. Reply
    hallie Sartelle March 13, 2018

    So many great tips. Thanks-you guys are a great team.

  14. Reply
    theBhive family March 13, 2018

    Is it listed anywhere how much this projects cost just to do this entire project? Would love to know as we are trying to sell our house and see if we can't build this to live in before the house sells.

  15. Reply
    Jacob Shoop March 13, 2018

    2 days!? Man I wish I had a shop like you two.

  16. Reply
    Lourie Family Homestead March 13, 2018

    Love your videos. I am preparing to build a tiny home and your videos are answering lots of questions for us. I had a question on the roofing pertaining to flashings and after watching this video, I am good. Thank you for sharing.

  17. Reply
    Jona Joplin March 13, 2018

    Just curious y'all didn't want an over hang for obvious reasons, but is there away you could do a gutter system would it be light enough and would it work? or would it be just as good the way it is?

  18. Reply
    Jamie Bettison March 13, 2018

    I love how you guys pronounce "roof", it sounds like the way I say "rough".. these videos and build are awesome! I am going to build one myself! thank you!

  19. Reply
    3 xs hawk koko March 13, 2018

    and on a large roof you can use 6. 8. 10

  20. Reply
    Steve 1961P. March 13, 2018

    2 things. 1) When you are creating a cap with your drip edge, you always bend the bottom around before the top is bent down. This will keep rain water out. 2) You mention that you screwed the side of the drip because you will be towing this down the road. Wrong idea. The metal has to expand and contract. screwing it down in both directions will contort the metal when it heats up. And also, the roofing should absolutely be able to withstand much higher winds in any condition than you can create towing it down the road… You sure won't be towing it down the road in huge winds. It would be too unsafe to control the vehicles.

  21. Reply
    Maurice Brown March 13, 2018

    I have asked many builders this question since been in America.. Why don't you paint / stain your boards underneath that roof flashing. ( facia boards I think ) I mean its just bare timber  & some timber protection is better than nothing over time.??

  22. Reply
    selja91 March 13, 2018

    Although I haven't fully mastered the vocab yet (I'm not a native English speaker), tiny house building looks so easy with you, guys. Your videos are awesome. Thanks!!!

  23. Reply
    MrFlyfisher123 March 13, 2018

    good job guys! like it

  24. Reply
    Truman March 13, 2018

    too much bla bla bla

  25. Reply
    CJ Grainger March 13, 2018

    Are there any other brands of the ice and water shield product? I can't find this on the Home Depot or Rona website for Canada.

  26. Reply
    rambo lambo March 13, 2018

    Great had some questions about tin roofing you just answered thank you …..

  27. Reply
    Robert Foster March 13, 2018

    Great job guys…. thank you 🙂

  28. Reply
    JamesMichaelDoyle March 13, 2018

    I absolutely adore how you guys say roof.

  29. Reply
    carlene elmore March 13, 2018

    Just how much would you charge to build it for me?????

  30. Reply
    Sondra Winters March 13, 2018

    Beautiful description, hand-drawn really helped!

  31. Reply
    GoogleMinus March 13, 2018

    I like the way that you not only say what to do, but why you are doing it. I plan on building a small house, but putting it on a foundation instead of a trailer.

  32. Reply
    MachinedConcepts March 13, 2018

    Enjoyed the video. I am going to be doing a standing seam concealed fastener roof on my home this spring, so it was nice to see some inside tips. Who makes the steel you guys used, ABC? My roof has a tapered gable end (tapers back from the peak to the eve) what would you suggest for getting your first panel square on a roof like this?

  33. Reply
    Steph S March 13, 2018

    Thanks for the info! Loving your videos 🙂 I'll be starting my Tiny House build soon and I'm going to have a shed style roof (lean to). A question that I hope you can answer, how would I cap off the top? I'm guessing I'll do the bottom section the same as yours, but I won't have the peak like you do. Thanks! I can't wait for the next video!!!

Leave a Reply

Your email address will not be published. Required fields are marked *